Showing 1429–1440 ile ilgili 2013 sonuçlarEn son sıralanmış
-
Parameter Specification Model Series A10VSO / A10VO Series Displacement Range 18-140 CC/Rev (Değişken Yerinden Olma) Nominal baskı 280 çubuk (4,060 psi) Maksimum baskı 350 çubuk (5,076 psi) Hız aralığı 1,800-3,300 rpm (modele göre değişir) Control Type Pressure/Flow/Power (DFLR/DR/DFR1) Connection Ports SAE flange ports (ISO 3019 standart) Ağırlık 12.9-65.4 kilogram (modele göre değişir) Sertifikalar ISO 9001, CE,...
-
Parameter Specification Model A4VG280 Displacement 280 ml/r Nominal Pressure 400 çubuk (40 MPa) En yüksek basınç 450 bar Control Type EP (Orantılı solenoid kontrolü) Structure Open Circuit Swashplate Design Max Flow Rate 600 L/min Built-in Features Pressure Cut-off Valve, Dual Relief Valves per High-pressure Port Power 400 kW Dimensions 40cm x 40cm x 30cm Weight 60...
-
Specification Detail Displacement 250 cm³ Operating Pressure 30 MPa Maximum Flow Rate 2500 RPM Motor Type Hydraulic Variable Displacement Shaft Diameter Standard ISO 3019-2 Port Size SAE Standard Flange Pressure Rating 35 MPa (Doruğa ulaşmak) Güç çıkışı 90 kW Dimensions 500 × 300 × 500 mm Weight 90 kg ±2% Fluid Compatibility Mineral-based Hydraulic Oil (ISO...
-
Parameter Value Model Numbers ATUS-90L100 / ATUS-90L130 / Atus-90L180 / ATUS-90L250 Displacement 100 CC/Rev (90L100) | 130 CC/Rev (90L130) | 180 CC/Rev (90L180) | 250 CC/Rev (90L250) Design Axial piston with parallel arrangement of pistons/swashplate Pressure Rating Standard operating pressure up to 350 çubuk (yapılandırmaya bağlı) Mounting SAE standard flange & cartridge type installation...
-
Parameter Specification Model Number JRR060 (Alternatif P/N: JRR060-1A) Yerinden etme 147 CM³/Rev ±% 3 (ISO 4397:2023) Basınç derecesi 30 MPA sürekli / 35 MPa Peak Port Configuration SAE J1926-1 Flange (1-1/4" SAE Kodu 61) Shaft Specification ISO 3019-2 14-Tooth Spline Seal System Triple Lip Seals (NBR/FKM bileşiği) Bearing Type Tapered Roller Bearings (İTİBAREN 720) Fluid Compatibility Mineral...
-
Parameter Value Model PV25 Displacement 25 CC/Rev çalışma basıncı 10 Çubuk (Standart), 700 Çubuk (Maksimum) Akış hızı 0.06-0.7 L/min Motor Power 0.09 kW Voltage 400 V Weight 5-25 kg Connection Flange/Thread (Standart) Temperature Range -15°C to 100°C Warranty 6 Aylar
-
Specification Details Motor Type Bent Axis Piston Hydraulic Motor Displacement 25 cm³/rev Max Pressure 210 çubuk (Sürekli) Maksimum hız 2500 rpm Continuous Torque 85 Nm @ 210 bar Shaft Diameter 25 mm (Standart) Liman Boyutu SAE 10 (ISO 6149) Ağırlık 9.0 Kg Boyutları (L × W × H) 500×350×620 mm Structure Double Housing Design Power Output 90 kW @...
-
Parameter Value Model A7VO500EP Displacement (cm³/rev) 500 Maksimum baskı 400 bar Nominal Pressure 350 bar Speed Range Up to 1,200 rpm Flow Rate at Vgmax 600 L/min Power at pnom 350 kW Weight Approx. 200 kg Control Type LR Hyperbolic Power Control with Pressure Cut-off Application Industrial Hydraulic Systems, Madencilik makineleri, Ağır inşaat ekipmanı
-
Parameter Specification Model A4VSO250LR2/30R-PPB13N00 Displacement 250 CC/Rev (Swashplate açısı ile ayarlanabilir) Nominal baskı 350 Çubuk Pik Basıncı 400 bar Control Type LR2G (Çift hiperbolik güç kontrolü) Dönme hızı 1,800-2,600 rpm (viskoziteye bağımlı) Hydraulic Fluid Mineral oil/Water glycol (Nas 1638 Sınıf 9) Installation Any orientation (dikey, rulman gerektirir) Inlet Pressure ≥0.8 bar absolute Weight...
-
Parameter Specification Motor Type Hydraulic Radial Piston Displacement 160 cc Max Pressure 300 çubuk sürekli güç 90 kW Weight 150 Kg Boyutları (Lxwxh) 500 X 500 X 500 mm Maximum Flow Rate 2500 l/min Structure Double Way Shaft Connection SAE Standard Port Size 1-1/4" SAE Operating Speed Range 50-1500 rpm Warranty 6 Months Brand OEM...
-
Parametre Spesifikasyon Yerinden Olma 130 cm³/rev maksimum basınç 280 bar Control Type LRDS with load sensing & pressure cutoff Rotation Direction Clockwise (CW) viewing drive shaft end Operating Temperature -20°C to +80°C Weight 80 kg ±2% Port Connections SAE Flange 1-1/4" (Basınç portu)Flanş 1" (Kasa tahliyesi) Compliance ISO 4401 Hydraulic Standards Seal Material FKM Fluorocarbon...
-
Parameter Value Displacement 130 cm³/rev Pump Type Axial Piston Pump Operating Pressure 280 çubuk (Maksimum) Maksimum akış hızı 260 L/min Rotation Speed 1000-3000 RPM ağırlığı 80 kg Connection Ports SAE 1-1/4" Flange Application Excavators, Construction Machinery Warranty 6 Aylar
