Showing 1189–1200 of 1895 resultsSorted by latest
-
Specification Detail Material Low Chromium Alloy Cast Steel (0.31%C, 2.3%Cr, 0.3%Mo)) Hardness 50-54 HRC (Tip Section)) Tensile Strength 1630-1810 MPa) Impact Toughness 20-28 J/cm² (U-notch)) Part Number 12076675K (SY55C.3.4-2) Compatibility SANY SY55C Pro/SY60C/SY60 Crawler Excavators) Installation Bolted Connection with Standard Bucket Adapter Weight 12-15 kg/Tooth (Industry Standard for 6-ton Class)) Surface Treatment Shot Blasted +...
-
Specification Detail Specification Detail Motor Type Orbital Piston Motor Displacement 35 cc/rev Max Pressure 250 bar Continuous Power 35 kW @ 1500 rpm Peak Torque 220 Nm Brake Holding Torque 180 Nm Port Configuration SAE 10 Flange Rotation Direction Bidirectional Hydraulic Fluid ISO VG 46 Compatible Operating Temperature -20°C to +80°C Weight 45 kg IP...
-
Parameter Specification Model V30E-95 Displacement 95 cm³/rev Pump Type Axial Piston Pump Max Pressure 350 bar (ISO 4401 Standard) Drive Shaft Horizontal Mounting (DIN Standards) Housing Material Cast Iron (EN-GJL-250) Port Connection SAE Flange 4-Bolt Power Requirement 55 kW @ 1500 rpm Flow Rate 55 L/min @ 350 bar Weight 55 kg Dimensions 350×400×450 mm...
-
Parameter Specification Motor Type Two-Way Radial Piston Hydraulic Motor Displacement 180 cc/rev Maximum Operating Pressure 30 MPa (4350 psi) Torque Output 850 Nm @ 30 MPa (calculated via displacement-pressure formula) Speed Range 10–300 rpm (typical for radial piston LSHT motors) Power Output 90 kW (120 hp) Maximum Flow Rate 2500 L/min Efficiency ≥92% (optimized radial...
-
Parameter Specification Model A6VE250 Displacement 250 cm³/rev Maximum Pressure 300 bar (30 MPa) Maximum Speed 2800 rpm Control Type Hydraulic proportional (HD) / Electric proportional (EP) Weight 60 kg Dimensions (L×W×H) 430×380×380 mm Power 90 kW Structure Double-way axial piston design with swashplate adjustment Certification ISO 9001, NQA 14001
-
Parameter Specification Displacement 165 cm³/rev Pump Type Axial Piston Pump (Open Circuit) Max Pressure 380 bar (5,500 psi) Power 90 kW @ 2,000 rpm Weight 50 kg Dimensions 300mm x 300mm x 300mm Fluid Compatibility ISO VG 46/68 Hydraulic Oil Operating Temperature -20°C to +80°C Certifications ISO 9001, CE Warranty 6 Months
-
Parameter Specification Core Components MK47-1A (Main Housing)42-3019-14 (Shaft Assembly) Displacement 47 cm³/rev ±2% (ISO 4397:2023) Pressure Rating 25 MPa Continuous / 30 MPa Peak Control Type Hydraulic Proportional (SAE J1926-1) Port Configuration 1" SAE Code 61 Flange Bearing System Tapered Roller (DIN 720 Class II) Seal Material HNBR/FKM Compound (ISO 6072) Plunger Specification 42CrMo4 Alloy...
-
Parameter Specification Displacement 55 ml/rev ±1% (ISO 8426 standard) Pressure Rating 31.5 MPa (315 bar) continuous operation Weight 50 kg (DIN 2093 certified) Port Connection SAE 12.7 mm (1/2") 4-bolt flange (ISO 6162-1) Operating Temperature -25°C to +80°C (EN 12763 class) Speed Range 1500-3000 rpm (VDMA 24560 compliant) Fluid Viscosity ISO VG 46/68 mineral oil...
-
Parameter Value Displacement Range 60–250 cc/rev (H1B060 to H1B250 models) Max Continuous Pressure 350 bar (5,076 psi) Peak Pressure 420 bar (6,090 psi) Speed Range 50–3,600 rpm Torque Output 110–450 Nm (H1B110 to H1B250 models) Flow Rate 20–250 L/min (dependent on displacement and speed) Efficiency ≥92% volumetric efficiency; ≥94% mechanical efficiency Fluid Compatibility Mineral oil-based...
-
Parameter Specification Displacement (Vg max) 28.1 cm³ (A7VO28) | 54.8 cm³ (A7VO55) | 80 cm³ (A7VO80) | 107 cm³ (A7VO107) | 160 cm³ (A7VO160) | 250 cm³ (A7VO250) | 355 cm³ (A7VO355) | 500 cm³ (A7VO500) Nominal Pressure 350 bar (Standard) Maximum Pressure 400 bar Control Type LR (Constant Power), DR (Pressure Control), LRD (Power...
-
Parameter Specification Series Models A4VG28, 40, 71, 90, 125, 180, 250 Displacement Range 28-250 cm³/rev Nominal Pressure 400 bar Peak Pressure 450 bar Control Types EP (Proportional), HW (Mechanical), HD (Hydraulic), DA (Speed-dependent) Rotation Speed 1000-2800 rpm Charge Pump Pressure 20 bar (integrated) Applications Concrete Pump Trucks, Construction Machinery, Closed-loop Systems Weight 50-101 kg (varies...
-
Parameter Specification Series 90M (030/042/055/075/100/130/180/250) Type Axial Piston Pump (Closed Loop System) Displacement Range 16-250 cc/rev (Multiple Models) Max Pressure 30 MPa (4350 PSI) Power Standard Industrial Motor Compatibility Mounting SAE Standard Flange Control Options Manual/Electric/Hydraulic Control Fluid Viscosity 25-50 cSt (Optimal Performance Range) Weight 39-50 kg (Model Dependent) Materials Cast Iron Housing with Hardened...
