Showing 1429–1440 dari 2013 hasilnyaDisusun oleh terkini
-
Parameter Specification Model Series A10VSO / A10VO Series Displacement Range 18-140 CC/REV (anjakan berubah -ubah) Tekanan nominal 280 bar (4,060 psi) Tekanan maksimum 350 bar (5,076 psi) Julat kelajuan 1,800-3,300 rpm (berbeza mengikut model) Control Type Pressure/Flow/Power (DFLR/DR/DFR1) Connection Ports SAE flange ports (ISO 3019 standard) Berat 12.9-65.4 kg (berbeza mengikut model) Pensijilan ISO 9001, CE,...
-
Parameter Specification Model A4VG280 Displacement 280 ml/r Nominal Pressure 400 bar (40 MPA) Tekanan puncak 450 bar Control Type EP (Kawalan solenoid berkadar) Structure Open Circuit Swashplate Design Max Flow Rate 600 L/min Built-in Features Pressure Cut-off Valve, Dual Relief Valves per High-pressure Port Power 400 kW Dimensions 40cm x 40cm x 30cm Weight 60...
-
Specification Detail Displacement 250 cm³ Operating Pressure 30 MPa Maximum Flow Rate 2500 RPM Motor Type Hydraulic Variable Displacement Shaft Diameter Standard ISO 3019-2 Port Size SAE Standard Flange Pressure Rating 35 MPA (Puncak) Output kuasa 90 kW Dimensions 500 × 300 × 500 mm Weight 90 kg ±2% Fluid Compatibility Mineral-based Hydraulic Oil (ISO...
-
Parameter Value Model Numbers ATUS-90L100 / ATUS-90L130 / ATUS-90L180 / ATUS-90L250 Displacement 100 CC/REV (90L100) | 130 CC/REV (90L130) | 180 CC/REV (90L180) | 250 CC/REV (90L250) Design Axial piston with parallel arrangement of pistons/swashplate Pressure Rating Standard operating pressure up to 350 bar (bergantung kepada konfigurasi) Mounting SAE standard flange & cartridge type installation...
-
Parameter Specification Model Number JRR060 (P/n alternatif: JRR060-1A) Pemindahan 147 cm³/rev ± 3% (ISO 4397:2023) Penilaian Tekanan 30 MPA berterusan / 35 MPa Peak Port Configuration SAE J1926-1 Flange (1-1/4" Kod SAE 61) Shaft Specification ISO 3019-2 14-Tooth Spline Seal System Triple Lip Seals (Kompaun NBR/FKM) Bearing Type Tapered Roller Bearings (Dari 720) Fluid Compatibility Mineral...
-
Parameter Value Model PV25 Displacement 25 tekanan operasi CC/Rev 10 Bar (Standard), 700 Bar (Maks) Kadar aliran 0.06-0.7 L/min Motor Power 0.09 kW Voltage 400 V Weight 5-25 kg Connection Flange/Thread (Standard) Temperature Range -15°C to 100°C Warranty 6 Bulan
-
Specification Details Motor Type Bent Axis Piston Hydraulic Motor Displacement 25 cm³/rev Max Pressure 210 bar (Berterusan) Kelajuan maksimum 2500 rpm Continuous Torque 85 Nm @ 210 bar Shaft Diameter 25 mm (Standard) Saiz pelabuhan SAE 10 (ISO 6149) Berat 9.0 dimensi kg (L × W × H.) 500×350×620 mm Structure Double Housing Design Power Output 90 kW @...
-
Parameter Value Model A7VO500EP Displacement (cm³/rev) 500 Tekanan maksimum 400 bar Nominal Pressure 350 bar Speed Range Up to 1,200 rpm Flow Rate at Vgmax 600 L/min Power at pnom 350 kW Weight Approx. 200 kg Control Type LR Hyperbolic Power Control with Pressure Cut-off Application Industrial Hydraulic Systems, Jentera perlombongan, Peralatan pembinaan berat
-
Parameter Specification Model A4VSO250LR2/30R-PPB13N00 Displacement 250 CC/REV (boleh laras melalui sudut swashplate) Tekanan nominal 350 Tekanan puncak bar 400 bar Control Type LR2G (Kawalan kuasa hiperbolik ganda) Kelajuan putaran 1,800-2,600 rpm (bergantung kepada kelikatan) Hydraulic Fluid Mineral oil/Water glycol (Nas 1638 Kelas 9) Installation Any orientation (menegak memerlukan pembilasan) Inlet Pressure ≥0.8 bar absolute Weight...
-
Parameter Specification Motor Type Hydraulic Radial Piston Displacement 160 cc Max Pressure 300 bar kuasa berterusan 90 kW Weight 150 dimensi kg (Lxwxh) 500 x 500 x 500 mm Maximum Flow Rate 2500 l/min Structure Double Way Shaft Connection SAE Standard Port Size 1-1/4" SAE Operating Speed Range 50-1500 rpm Warranty 6 Months Brand OEM...
-
Pemindahan spesifikasi parameter 130 CM³/Rev Tekanan maksimum 280 bar Control Type LRDS with load sensing & pressure cutoff Rotation Direction Clockwise (CW) viewing drive shaft end Operating Temperature -20°C to +80°C Weight 80 kg ±2% Port Connections SAE Flange 1-1/4" (Pelabuhan tekanan)Sae Flange 1" (Saliran kes) Compliance ISO 4401 Hydraulic Standards Seal Material FKM Fluorocarbon...
-
Parameter Value Displacement 130 cm³/rev Pump Type Axial Piston Pump Operating Pressure 280 bar (Maks) Kadar aliran maksimum 260 L/min Rotation Speed 1000-3000 Berat RPM 80 kg Connection Ports SAE 1-1/4" Flange Application Excavators, Construction Machinery Warranty 6 Bulan
