Showing 61–72 ~의 110 결과최신으로 정렬되었습니다
Parameter Value Model A8V0200 Displacement 280 CC/Rev (가와사키 K3V 시리즈 표준으로 확인) Type Variable Displacement Axial Piston Pump Operating Pressure 30 MPA (4,350 psi) 최대 유량 250 l/min @ 2,000 rpm Power 90 KW (121 HP) Connection Size SAE 1-1/4" 플랜지 (250L/분 펌프의 표준) 무게 150 kg 치수 400 × 500 ×...
Parameter Specification Model DPVPO108 Displacement 108 CC/Rev (가변 변위) 작동 압력 350 술집 (명사 같은) / 400 술집 (정점) Structure Axial piston pump with swashplate design Weight 50 kg Connection ISO standard flange mounting Power 90 KW (연속 작동) Flow Rate Up to 300 l/min @ 1800 rpm Application Open/Closed circuit systems Certification CE, ISO 9001
Parameter Specification Model ERR Series 100 배수량 100 cm³/rev Max. 유량 1600 l/min @ 100 bar Operating Pressure 250 술집 (마디 없는) 피크 압력 350 bar Drive Speed 1800-2200 rpm Fluid Viscosity 15-1000 cSt Weight 45 kg Port Connections SAE 12 (압력 포트)SAE 10 (케이스 배수) Temperature Range -20°C to +90°C
매개 변수 사양 변위 53 cm³/rev Max Operating Pressure 250 막대 최대 유량 80 L/min Connection Port Size 1" SAE Flange Weight 68 kg 치수 200 × 200 × 300 mm Control Type Hydraulic Pressure Compensation Rotation Clockwise/Counterclockwise (선택 과목) Shaft Type Standard Taper (Sae a) Fluid Temperature Range -20°C to 80°C Viscosity Range 15 to...
Parameter Details Series A7VO Series (개방 회로) Displacement 55 cm³/rev (A7VO55), 250-500 cm³/rev (A7VO250/A7VO500) Nominal Pressure 350 bar Maximum Pressure 400 bar Control Type LRD (압력 차단으로 전력 제어) Shaft Diameter 30 mm (A7VO55) Weight 25 kg (A7VO55), 40-60 kg (A7VO160/A7VO500) Hydraulic Fluid Mineral oil or fire-resistant fluids (HFC/HFD) Speed Range Up to 2500...
Parameter Specification Model Series A10VSO / A10VO Series Displacement Range 18-140 CC/Rev (가변 변위) 공칭 압력 280 술집 (4,060 psi) 최대 압력 350 술집 (5,076 psi) 속도 범위 1,800-3,300 RPM (모델마다 다릅니다) Control Type Pressure/Flow/Power (DFLR/DR/DFR1) Connection Ports SAE flange ports (ISO 3019 기준) 무게 12.9-65.4 kg (모델마다 다릅니다) 인증 ISO 9001, CE,...
Parameter Specification Model A4VG280 Displacement 280 ml/r Nominal Pressure 400 술집 (40 MPA) 피크 압력 450 bar Control Type EP (비례 솔레노이드 대조군) Structure Open Circuit Swashplate Design Max Flow Rate 600 L/min Built-in Features Pressure Cut-off Valve, Dual Relief Valves per High-pressure Port Power 400 kW Dimensions 40cm x 40cm x 30cm Weight 60...
Specification Detail Displacement 250 cm³ Operating Pressure 30 MPa Maximum Flow Rate 2500 RPM Motor Type Hydraulic Variable Displacement Shaft Diameter Standard ISO 3019-2 Port Size SAE Standard Flange Pressure Rating 35 MPA (정점) 전원 출력 90 kW Dimensions 500 × 300 × 500 mm Weight 90 kg ±2% Fluid Compatibility Mineral-based Hydraulic Oil (ISO...
Parameter Specification Model Number JRR060 (대체 p/n: JRR060-1A) 배수량 147 cm³/Rev ± 3% (ISO 4397:2023) 압력 등급 30 MPA 연속 / 35 MPa Peak Port Configuration SAE J1926-1 Flange (1-1/4" SAE 코드 61) Shaft Specification ISO 3019-2 14-Tooth Spline Seal System Triple Lip Seals (NBR/FKM 화합물) Bearing Type Tapered Roller Bearings (에서 720) Fluid Compatibility Mineral...
Parameter Value Model PV25 Displacement 25 CC/Rev 작동 압력 10 술집 (기준), 700 술집 (맥스) 유량 0.06-0.7 L/min Motor Power 0.09 kW Voltage 400 V Weight 5-25 kg Connection Flange/Thread (기준) Temperature Range -15°C to 100°C Warranty 6 달
Parameter Value Model A7VO500EP Displacement (cm³/rev) 500 최대 압력 400 bar Nominal Pressure 350 bar Speed Range Up to 1,200 rpm Flow Rate at Vgmax 600 L/min Power at pnom 350 kW Weight Approx. 200 kg Control Type LR Hyperbolic Power Control with Pressure Cut-off Application Industrial Hydraulic Systems, 광업 기계, 무거운 건축 장비
매개 변수 사양 변위 130 CM³/Rev 최대 압력 280 bar Control Type LRDS with load sensing & pressure cutoff Rotation Direction Clockwise (CW) viewing drive shaft end Operating Temperature -20°C to +80°C Weight 80 kg ±2% Port Connections SAE Flange 1-1/4" (압력 포트)SAE 플랜지 1" (케이스 배수) 준수 ISO 4401 Hydraulic Standards Seal Material FKM Fluorocarbon...