Visualizzazione di 73-84 di 122 risultatiOrdina in base al più recente
Parameter Value Model A8V0200 Displacement 280 cc/rev (Verificato con gli standard della serie Kawasaki K3V) Type Variable Displacement Axial Piston Pump Operating Pressure 30 MPa (4,350 psi) Max Flow Rate 250 L/min @ 2,000 rpm Power 90 kW (121 CV) Connection Size SAE 1-1/4" Flangia (Standard per pompe da 250 litri/min) Weight 150 kg Dimensions 400 × 500 ×...
Parameter Specification Model DPVPO108 Displacement 108 cc/rev (spostamento variabile) Operating Pressure 350 bar (Nominale) / 400 bar (Picco) Structure Axial piston pump with swashplate design Weight 50 kg Connection ISO standard flange mounting Power 90 kW (operazione continua) Flow Rate Up to 300 L/min @ 1800 rpm Application Open/Closed circuit systems Certification CE, ISO 9001
Parameter Specification Model ERR Series 100 Displacement 100 cm³/rev Max. Flow Rate 1600 L/min @ 100 bar Operating Pressure 250 bar (Continuo) Peak Pressure 350 bar Drive Speed 1800-2200 rpm Fluid Viscosity 15-1000 cSt Weight 45 kg Port Connections SAE 12 (Porta di pressione)SAE 10 (Scarico del caso) Temperature Range -20°C to +90°C
Parameter Specification Displacement 53 cm³/rev Max Operating Pressure 250 bar Max Flow Rate 80 L/min Connection Port Size 1" SAE Flange Weight 68 kg Dimensions 200 × 200 × 300 mm Control Type Hydraulic Pressure Compensation Rotation Clockwise/Counterclockwise (Opzionale) Shaft Type Standard Taper (Sae a) Fluid Temperature Range -20°C to 80°C Viscosity Range 15 to...
Parameter Details Series A7VO Series (Circuito aperto) Displacement 55 cm³/rev (A7VO55), 250-500 cm³/rev (A7VO250/A7VO500) Nominal Pressure 350 bar Maximum Pressure 400 bar Control Type LRD (Controllo di potenza con taglio della pressione) Shaft Diameter 30 mm (A7VO55) Weight 25 kg (A7VO55), 40-60 kg (A7VO160/A7VO500) Hydraulic Fluid Mineral oil or fire-resistant fluids (HFC/HFD) Speed Range Up to 2500...
Parameter Specification Model Series A10VSO / A10VO Series Displacement Range 18-140 cc/rev (spostamento variabile) Nominal Pressure 280 bar (4,060 psi) Maximum Pressure 350 bar (5,076 psi) Speed Range 1,800-3,300 giri / min (varia per modello) Control Type Pressure/Flow/Power (DFLR/DR/DFR1) Connection Ports SAE flange ports (Standard ISO 3019) Weight 12.9-65.4 kg (varia per modello) Certifications ISO 9001, Ce,...
Parameter Specification Model A4VG280 Displacement 280 ml/r Nominal Pressure 400 bar (40 MPA) Peak Pressure 450 bar Control Type EP (Controllo del solenoide proporzionale) Structure Open Circuit Swashplate Design Max Flow Rate 600 L/min Built-in Features Pressure Cut-off Valve, Dual Relief Valves per High-pressure Port Power 400 kW Dimensions 40cm x 40cm x 30cm Weight 60...
Specification Detail Displacement 250 cm³ Operating Pressure 30 MPa Maximum Flow Rate 2500 RPM Motor Type Hydraulic Variable Displacement Shaft Diameter Standard ISO 3019-2 Port Size SAE Standard Flange Pressure Rating 35 MPa (Picco) Power Output 90 kW Dimensions 500 × 300 × 500 mm Weight 90 kg ±2% Fluid Compatibility Mineral-based Hydraulic Oil (Iso ...
Parameter Specification Model Number JRR060 (P/N alternativo: JRR060-1A) Displacement 147 cm³/rev ±3% (ISO 4397:2023) Pressure Rating 30 MPa Continuous / 35 MPa Peak Port Configuration SAE J1926-1 Flange (1-1/4" Codice SAE 61) Shaft Specification ISO 3019-2 14-Tooth Spline Seal System Triple Lip Seals (Composto NBR/FKM) Bearing Type Tapered Roller Bearings (Da 720) Fluid Compatibility Mineral...
Parameter Value Model PV25 Displacement 25 cc/rev Operating Pressure 10 Bar (Standard), 700 bar (Max) Flow Rate 0.06-0.7 L/min Motor Power 0.09 kW Voltage 400 V Weight 5-25 kg Connection Flange/Thread (Standard) Temperature Range -15°C to 100°C Warranty 6 Months
Parameter Value Model A7VO500EP Displacement (cm³/rev) 500 Maximum Pressure 400 bar Nominal Pressure 350 bar Speed Range Up to 1,200 rpm Flow Rate at Vgmax 600 L/min Power at pnom 350 kW Weight Approx. 200 kg Control Type LR Hyperbolic Power Control with Pressure Cut-off Application Industrial Hydraulic Systems, Macchinari minerari, Attrezzature da costruzione pesanti
Parameter Specification Displacement 130 cm³/rev Maximum Pressure 280 bar Control Type LRDS with load sensing & pressure cutoff Rotation Direction Clockwise (CW) viewing drive shaft end Operating Temperature -20°C to +80°C Weight 80 kg ±2% Port Connections SAE Flange 1-1/4" (Porta di pressione)SAE Flange 1" (Scarico del caso) Compliance ISO 4401 Hydraulic Standards Seal Material FKM Fluorocarbon...